COVERAGE: 204 SQ FT/GAL @ 13.7 MILS with top coat. Coverage per kit 610 sq ft/3 gal kit.Coverage may vary based upon application technique or surface porosity.
Topcoat: Single component urethane-type custom formulation. Coverage 500-650 sq ft/gal. Applies ‘milky white’ then dries crystal-clear. Mil thickness 3-5 mils depending on application method. Apply with roller or brush.
Shelf life: 1 year in unopened containers. Store in a cool dry place.
Chemical Resistance: Resists xylene, methanol, sulfuric acid, sodium hydroxide, acetic acid, gasoline and petroleum distillates. Contact our office for full resistance chart. Chemcial exposure times may vary.
'FULL BROADCAST' FLECK MIXER
Please click the 'Please Select Your Color Mix' button to view your selection. Please note that 'full broadcast' floors utilized a very large amount of flecks which cover almost all of the epoxy. These floors are much more expensive, and more difficult to install properly and Armorpoxy does not recommend this type of floor except to more experieinced applicators. The 'full broadcast' effect can be achieved by purchasing from us a larger amount of flecks. This 'full broadcast' visual fleck mixer does not show the base color epoxy, only the fleck mix.
Make up your own custom decorative fleck blends. Flecks must be ordered in total of 5 lbs per mix. (5 lbs, 10 lbs, 15 lbs, etc). Pricing is $9.95/lb. Once you have determined your mix, please contact our office to purchase info@armorpoxy.com
